Optical Fiber Fusion Splicer T-15S
Four motors 丨Adjust the core alignment丨7s fusion
Automatic/semi-automatic/manual fusion
[High frequency][real-time][Closed loop] intelligent arc management
Low loss and High efficiency
Four motors 丨Adjust the core alignment丨7s fusion
Automatic/semi-automatic/manual fusion
[High frequency][real-time][Closed loop] intelligent arc management
The heating temperature can be adjusted automatically
TPU anti-seismic protective cover
|
Technical parameter |
||
|
project |
|
|
|
Applicable optical fiber |
Material |
Quartz glass (silica) |
|
|
Type and model |
SMF(ITU-T G.652)、MMF(ITU-T G.651)、DSF(ITU-T G.653)、NZDSF(ITU-T G.655)、BIF(ITU-T G.657) |
|
|
Fiber diameter |
Coating diameter: 80μm~150μm, coating diameter: 100μm~1,000μm |
|
|
Cut length |
9.6~16mm (coating diameter 250μm&900μm) |
|
|
Optical fiber for fixture |
250μm bare fiber, 900μm optical fiber, 2~3mm pigtail, leather cable，And so on |
|
Standard performance |
Welding loss (standard) |
SMF: 0.02dB、MMF: 0.01dB、DSF: 0.04dB、NZDS: 0.04dB |
|
|
Automatic welding time (standard) |
7s Fusion (SM G652 Auto mode) |
|
|
Automatic heating time (typical) |
25s heating (Standard 60mm mode) |
|
|
Optical fiber observation method and optical fiber magnification |
Dual CMOS camera observation system, 8 times optical magnification lens X/Y alone display 320 times, X/Y around the same display 200 times, X/Y is 250 times wide and 120 times high |
|
|
Tension test |
2N |
|
|
Fiber heat shrink protective sleeve |
Supports 25mm, 40mm, 50mm, and 60mm heat shrink tubing |
|
Function |
Optic fiber endface melt polishing |
Left melt polishing，Right melt polishing |
|
|
Melt polishing time |
8s |
|
|
Backlight |
Level 9 backlight is adjustable |
|
|
Volume |
Level 9 Volume is adjustable and can be turned off |
|
|
Automatic on/off |
Welding, heating, discharge pause, tension test, image saving, automatic shutdown, sleep |
|
|
Weld data storage/weld image capture |
The latest welding data 9999 pieces, the latest welding image 100 pieces. |
|
Size/weight |
Main engine size |
139mm(W)×160mm(D)×147mm(H) (with anti-seismic rubber) |
|
|
Main engine weight |
1.9kg(including battery) |
|
|
Display |
4.3-inch capacitive touch display |
|
|
USB port |
USB2.0(mini-B) |
|
Power supply |
AC input |
The value ranges from 100 to 240V and is 50/60Hz |
|
|
DC input |
16V/5A |
|
|
Battery module |
Lithium ion 11.1V, 66.6Wh |
|
|
Battery capacity |
6000mAh, about 300 times |
|
|
Battery charging time |
≤4 hours |
|
Electrode rod life |
3000 to 5000 times |
|
|
Working condition |
Altitude 0~ 5000m, relative humidity 0~95%, temperature -20~50℃, maximum wind speed 15m/s |
|
|
Product configuration (standard configuration) |
|||
|
Fusion splicer *1 |
Battery（6000mAh）*1 |
Spare electrode *1 pair |
Fiber cleaver*1 |
|
|
Leather wire pliers*1 |
Power adapte |
Power cord*1 |
|
Cooling support *1 |
Cleaning brush *1 |
Dust blower*1 |
tweezers *1 |
|
Alcohol bottle *1 |
toolbox *1 |
Toolbox strap *1 |
CD and Test report *1 |
Fiber optic stripper*1
*1
